Epilog Zing

Image of an Epilog Zing Laser Cutter

This laser is a 40 watt CO2 laser, which means it can cut through wood, cardboard, paper, acrylic plastics, leather, fabric and other similar materials.

REQUIREMENTS

  • Epilog Laser Cutting and Engraving
  • Travel Tumbler Laser Engraving 

TECHNICAL SPECS

Epilog Zing 16

Engraving Area: 16″ x 24″

Maximum Material Thickness: 4.5″

Maximum Material Thickness with Table removed: 11″ with a 23.5″ x 17″ engraving area.

Laser Wattage: 30 or 40 Watts

Lase Source: State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.

Intelligent Memory Capacity: Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.

Air Assist: Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

Laser Dashboard: The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.

Red Dot Pointer: Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Mini and Helix Lasers allows you to have a visual reference for locating where the laser will fire.

Relocatable Home: When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.

Operating Modes: Optimized raster, vector or combined modes.

Motion Control System: High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.

X-Axis Bearings: Ground and polished stainless steel NeverWear Bearing System.

Belts: Advanced B-style Kevlar Belts.

Resolution: User controlled from 100 to 1000 dpi.

Speed and Power Control: Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.

Print Interface: 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.

Size (W x D x H): 28.75″ x 22.125″ x 11.75″

Weight: 95 lbs

Requirements: Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.

Maximum Table Weight: The Zing 16 have a static table weight of 50lbs and a lifting table weight of 25 lbs.

 Ventilation System: 350 – 400 cfm (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4″ in diameter.

VISIT EPILOG LASER WEBSITE 

Welcome to the new FUSE Makerspace Website

We are working hard each day to make our new site the best it can be! You may run into issues or errors while we perfect our new member experience. If you have questions, please email info@fusemakerspace.org and we’ll get back to you within 1 business day.

Thank you for your patience as we work on the site!