Bosch 12″ Dual Bevel Sliding Compound Miter Saw

Bosch Miter Saw
Chop/Miter Saw – This saw can be used to make straight, mitered, beveled, and compound cuts. It can easily be adjusted to cut the angle you need into your piece of wood.

REQUIREMENTS

  • Intro to Woodworking
  • Members need to provide their own safety glasses or purchase a pair ($3) at FUSE.

TECHNICAL SPECS

Amperage 15.0
Bevel Angle Range 47° left and 47° right
Bevel Stops 0°, 33.9°, 45° and 47° (L/R)
Blade Diameter 12.0
Blade Size 12″
Case Type
Category Compound Miter Saws
Dust Collection Yes
Electric Motor Brake Yes
Height 27.0″
Height of Table from Base Feet to Table Surface – In. 3.75
Length 32.375″
Max. Base Molding Against Fence 3-7/8 In. (6-3/4 In. from 0° to 47 L)
Max. Crown Molding (38° Spring) Angled Against Fence 5-1/4 In. (5-1/2 In. from 0° to 47° L)
Max. Crown Molding (45° Spring) Angled Against Fence 6 In.
Max. Cut Capacity – 0° Miter 0° Bevel 3-1/2 In. x 13-1/2 In. (4×14 Dimensional Lumber)
Max. Cut Capacity – 0° Miter 45° Left Bevel 2 In. x 13-1/2 In. (2×14 Dimensional Lumber)
Max. Cut Capacity – 0° Miter 45° Right Bevel 1-1/2 In. x 13-1/2 In. (2×14 Dimensional Lumber)
Max. Cut Capacity – 45° Miter 0° Bevel 3-1/2 In. x 9-1/2 In. (4×10 Dimensional Lumber)
Max. Cut Capacity – 45° Miter 45° Left Bevel 2 In. x 9-1/2 In. (2×10 Dimensional Lumber)
Max. Cut Capacity – 45° Miter 45° Right Bevel 1-1/2 In. x 9-1/2 In. (2×10 Dimensional Lumber)
Miter Angle Range 52° Left, 60° Right
Miter Detents 0°, 15°, 22.5°, 31.6°, 45°, (Left/Right) 60°, (Right)
Miter Positive Stops 0°, 15°, 22.5,° 31.6°, 45° (Left/Right), 60° (Right)
No Load RPM 3,800
Separate On/Off Speed Control Blank
Voltage 120V
Weight 65.0lb
Width 26.5″
Works With Miter Saw Stands T1B, T4B, GTA3800Crown Molding Stops (Pair) MS1233Length Stop MS1234Vacuum Hoses VH1022, VH1035, VH1635 (by means of VX120 adapter included with those hoses), VH1622A and VH1635A (by means of anti-static adapter included with those hoses), VAC005, VAC006, VAC008, and most other 35 mm and 22 mm hosesAdapters for 1-1/4 in and 1-1/2 in. Vacuum Hoses VAC002 or VAC024Adapter for 2-1/2 in. Vacuum Hoses VAC020Arbor Washer Laser Guide LS010

Welcome to the new FUSE Makerspace Website

We are working hard each day to make our new site the best it can be! You may run into issues or errors while we perfect our new member experience. If you have questions, please email info@fusemakerspace.org and we’ll get back to you within 1 business day.

Thank you for your patience as we work on the site!