Dimensions and weight: 15 inch x 13.5 inch x 15.3 inch
Build volume: 8.5 inch x 8.5 inch x 7.9 inch (Left or Right Nozzle)
7.8 inch x 8.5 inch x 7.9 inch ( Dual Extrusion)
Printer and printing properties
Pre-assembled The Ultimaker 3 is an out of the box experience and immediately ready to use, as it comes pre-assembled. If you’re looking for a DIY kit that you need to assemble yourself, check out our Ultimaker Original+.
0.25 mm nozzle: 150 – 60 micron
0.4 mm nozzle: 200 – 20 micron
0.8 mm nozzle: 600 – 20 micron A micron is the measurement used to define the thickness of a 3D printed layer. 20 micron is 0.02 mm thick. Thinner layers are used for high detailed prints, thicker layers are great for fast prototypes.
20 ˚C to 100 ˚C heated glass build plate Thanks to the 20 ˚C to 100 ˚C heated build plate you can use a wide selection of 3D printing materials.
Build plate leveling
Active leveling The new active leveling system ensures more accurate build plate calibration and better adhesion. The capacitive sensor in the print head measures distances between the build plate and the nozzle, and the tilt angle is compensated by adjusting the z height in the first layers.
Fused filament fabrication (FFF) This is the process of depositing layers of filament, one on top of the other, to build up shapes and models. It is a form of additive manufacturing technology and the process used by all Ultimaker 3D printers.
Dual extrusion print head Thanks to swappable print cores, you can quickly switch between different filaments and material-matching print cores. This results in higher uptime and easier maintenance of your 3D printer.
Print core replacement
Swappable print cores Faster print core changes mean higher uptime and easier maintenance. Your Ultimaker 3 comes with print cores for build (AA) and water-soluble support (BB) materials.
< 24 mm³/s
The build speed relates to how fast the filament can be extruded through the hot end of the 3D printer. The higher the value the greater the achievable print speed.
Print head travel speed
30 to 300 mm/s Travel speed relates to how quickly the print head can move.
Dual geared feeder The new dual geared feeders exert more force on the filament, and also eliminate heat exposure from the motor. You can easily insert or remove your 3D printing materials and select the correct pressure with a push on a button.
12.5, 12.5, 2.5 micron The more accurate the stepper motors within the printer, the greater degree of accuracy can be achieved with each print. Our motors are engineered and tested to achieve the very highest accuracy.
0.25 mm, 0.4 mm, 0.8 mm The swappable print cores mean easy and fast material changeovers, seamless 3D printing experience and more time-efficient workflow. The list of supported material combinations and nozzle sizes will be expanded in the future.
180 ˚C to 280 ˚C A wide nozzle temperature range means greater flexibility in the 3D printing material choice.
Nozzle heat up time
< 2 minutes The nozzle heat up time relates to how fast you can start printing, as well as how fast it can melt the plastic.
Build plate heat up time
< 4 minutes The build plate heat up time relates to how fast it can reach the print-ready temperature.
Open filament system An open filament system means you can use any type of 3D printing material that meets your specific requirements.
2.85 mm When purchasing filaments for your Ultimaker 3, you must buy 2.85mm diameter filament – this is the optimal size for your Ultimaker.
Nylon, PLA, ABS, CPE, CPE+, PVA, PC, TPU 95A, PP, and Breakaway The Ultimaker 3 is a highly flexible 3D printer and gives you the freedom to choose whatever type of filament that suits your project. The Ultimaker 3 is optimized for Ultimaker Nylon, PLA, ABS, CPE and PVA with more materials to come.
A spool of Ultimaker filament is 750 g
Software and connectivity
Ultimaker Cura – print preparation software
Cura Connect – printer management solution Ultimaker Cura is our industry-leading slicing and preparation software that turns your 3D model into a file your printer can use. You can download Ultimaker Cura for free now. Print over your local network and you can use Cura Connect to manage multiple 3D printers.
Free on macOS, Windows and Linux Ultimaker Cura works seamlessly on macOS, Windows and Linux.
SolidWorks, Siemens NX, Autodesk Inventor More plugins are available from the Ultimaker Cura plugin browser to make your 3D printing experience even easier.
Supported file types
STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG An STL file is the most used file type for 3D printing. Nearly any 3D modeling software program is able to create these files.
WiFi, LAN or USB
Operating ambient temperature
15 °C to 32 °C (59 °F to 89 °F) Your Ultimaker 3 operates at its best at these temperatures.
0 °C to 32 °C (32 °F to 89 °F) Your Ultimaker 3 can be stored or left inactive at these temperatures.
100 – 240 V
4A, 50-60 Hz
221 W max.